Christian63 Christian63
[LiDAX Ultra 2000 AWD] Thick obstacles
The MOVA 1000 LIDAR, set to avoid obstacles of 20cm, sees Plantain stalks (Plantago major) of 15-20cm as obstacles and therefore does not mow the area where they are present. The sensitivity of the LIDAR should be adjusted to not consider very thin obstacles (less than 2mm) as obstacles.
Posted 2025-7-11 11:13:29 Translate
5570
Homepage / Products / Robotic Mowers
8 Comments
CW881840
Delusione più totale
2025-7-11 16:20:13 Translate
Report this comment
HP784076
Indeed
2025-7-11 21:45:46 Translate
Report this comment
Riky
Hi XB166498,
it is a good suggestion, but keep in mind that the manual said: "Use a push mower to mow the grass to a height of no more than 10 cm."
So these stalks should not be present.  I suggest you run the mowing more frequently.
2025-7-14 08:32:19 Translate
Report this comment
Vincent
If you low every 2 days, it will never happen
2025-7-15 21:44:18 Translate
Report this comment
vle
Please check 'Settings' ... there seems to be something for this case.
Just now, I cannot test it myself.
2025-7-16 18:22:51 GB Translate
Report this comment
Christian63
Same problem. I have disabled obstacle recognisation, but the problem continue
2025-7-27 18:41:17 Translate
Report this comment
KQ948047
Same here. I think the last update is a mess. It was working fine before.
2025-8-2 09:26:00 Translate
Report this comment
Fred
same here
2025-8-16 16:33:52 Translate
Report this comment
Login to comment...
1
8
Report