|
Hello, MOVA1000 supports Wi-Fi connection.
You can connect to Wi-Fi by following the steps below:
Enable Bluetooth on your phone and place it as close to the robot as possible. Open the app and tap Scan QR code to connect to the robot. This will open the QR code scanning interface.
Scan the QR code on the inside of the robot's top cover and tap Start pairing in the app. Alternatively, you can manually select the MOVA 1000 through the app.
Press and hold the [OK] button on the control panel for 3 seconds. When you hear "Robot enters Bluetooth pairing mode," tap Start pairing in the app.
After successful Bluetooth pairing, connect to Wi-Fi through the app. Ensure the MOVA 600/1000 and your phone are on the same Wi-Fi network.
Enter your Wi-Fi account and password according to the app's instructions and tap Next. The app will automatically connect to Wi-Fi.
Once connected, the MOVA 600/1000 device icon will appear on the app, and the center connection indicator on the MOVA 600/1000 control panel will light up solid blue.
Note: The robot only supports 2.4G or a mixed 2.4G & 5G network. | 
