Positioning base station outside mowing area

Could some kind person please outline the procedure on how to achieve this, there is only 1 zone.

TranslateView Original Text

Good morning, thank you very much for your feedback. Regarding your question about placing the base station outside the mowing area, you can find the "Corridor Setting" on the map creation page or the "Map Edit" page in the App. Then remotely control the robot to the working area to set the start point of the corridor. Next, navigate the robot to the front of the base station and set the end point (keep the robot’s head as close to the base plate as possible, but do not drive the robot into the dock). After that, the corridor will be generated. We hope this information is helpful to you. Please feel free to contact us if you have any further questions.

Hello,  thank you for those instructions. My lawn is raised 150mm above the patio, the mower quite happily ascends the ramp but completely refuses to descend it, at first I assumed it saw the contrasting border colour as a no go area, but even when covered in astroturf it will not travel down, can you help please?

How do I upload a video, my phone only shows photos