Rain Protection without rain

Is it true that to activate rain protection, there no need to be rain at all?
Today was sunny day ( no rain at all ).
MOVA start to mow.
There are few bushes which MOVA knows.
But just in turning point some leaves or so maybe hide/touch LIDAR
... and after Rain protection activated. This has happened twice in same place.
So, MOVA try to rush back to a charging base (and it has challenge to do that).
Normally, it would take 1... 8 hours waiting until it would continue mowing.
Because, it was sunny day - I clicked to [ Continue ].
Question: Could it possible to verify that there are really rain, which triggers protection?
If there are no more rain after activating rain protection - it seems to be something else
and MOVA could continue mowing too.

TranslateView Original Text

Hello, if dew on leaves rubs against the LiDAR, rain protection can also be triggered.

Some other users have also reported issues with leaves or branches rubbing against the LiDAR triggering rain protection. We have reported this issue to our technical team, who are working diligently to optimize it in the next firmware release.

We recommend keeping the LiDAR surface clean to reduce false alarms caused by dirt. If cleaning still doesn't work, please disable rain protection on a sunny day.

I had the same trouble with Rain détection on sunny days when my robot drive under some leaves.

I have the same problem if the rain protection is on the will not mow. I have no leafs in the yard or even dew. This started after the last firmware upgrade. This firmware and app need alot of work done to them before I would ever recommend buying thud mower.

I had same issue with leafs