Use lidar on path for detecting objects

Is it possible to turn on the lidar while the mower drives over paths. Somethimes it could be possible that my paths are blocked with for example a car. The mower whill than stay on the path and will bump into that car 3 times. Could it maybe be possible to turn on the lidar to detect those objects on the forehand so it will not bump into any object or maybe could drive around it. Just to prevent damage on the mower or the objects. Thank you!

TranslateView Original Text

Hello,
Hello, please check if the edge obstacle avoidance mode is enabled: Go to the "Mowing Preferences" tab on the device settings page of the app. Once enabled, MOVA 600/1000 will actively avoid obstacles at the edge.

1. MOVA 600/1000's obstacle avoidance function currently supports four height levels (≥5 cm, ≥10 cm, ≥15 cm, ≥20 cm), and cannot detect obstacles below 5 cm.

2. Uneven roads may affect the accuracy of radar obstacle avoidance.

3. The robot may hit or rub against side obstacles when turning.

4. The robot has difficulty detecting highly reflective or completely black objects, which may cause recognition errors.

If you need further assistance, please provide your work order number or contact us through the following methods: "Me > Help & Feedback > Contact Us > Online Customer Service".